Maximize the lifespan of your property's flat roof.

Need Emergency Service? Call (905) 397-1198

Skylight Repair Services by Videl

Install New or Repair Leaky Skylights

Get a flat roof expert on your property for a free assessment.

(905) 397-1198 Claim Your FREE Roof Report

Start with a Free Roof Report

We’ll inspect your roof and provide the answers you need to budget, plan, and protect your property.

Your information is confidential and will never be shared.

Kirby Hewines explains the free roof condition report for property owners and building managers in Ontario

Is Your Skylight Leaking?

Every skylight leak traces back to the same three failure points: the sealant, the flashing, and the curb tie-in. Ignore any of them long enough and the membrane around the skylight goes with it.

At Videl Roofing, we diagnose the actual failure point and rebuild your skylight’s seal, flashing, and membrane in a single trip.

Get started with a FREE Roof Condition Report:

50+ Point Roof Inspection

by commercial roofing experts

Photo Documentation

of all wear, damage, and deterioration

Detailed Summary of Defects

with prioritized action items and cost estimates

New Skylight Installed in Under 48 Hours

Our skylight installation services never disrupt your day-to-day operations.

Skylight Inspection & Planning

STEP 1

Cut and frame the opening

We measure from inside the building, mark the cut on the deck, and frame the curb to manufacturer spec. If the work runs past one day, the opening is properly sealed to prevent leaks.

Installing New Skylight on Flat Roof

STEP 2

Install the curb and tie into the membrane

The curb is fastened to the deck and integrated with the surrounding flat roof system. Flashing is installed in continuous plies, fully tied into the existing membrane.

Final Step for skylight installation on flat roof in Ontario

STEP 3

Set the skylight and seal the perimeter

Finally, the skylight is set onto the curb, fastened, and sealed with high-grade sealant rated for Ontario freeze-thaw. We pressure-test the seal before leaving the site.

What Daylight Does for a Commercial Property

Skylights are one of the few upgrades that improve how a commercial building looks, feels, and operates all at once. Tenants notice the daylight. Owners notice the lighting bills. Buyers notice it on the walkthrough.

A new skylight runs $800 to $2,500 installed, and repairs on an existing unit run $200 to $700. Every job is quoted as a fixed price after a free roof assessment.

Skylights can cut daytime lighting demand by 25 to 80 percent in warehouses, manufacturing floors, and large retail spaces.

Daylit interiors are linked to higher worker productivity, fewer sick days, and higher tenant retention.

Passive solar gain in spring and fall reduces heating demand on cool sunny days. Properly specified low-E glazing prevents the reverse problem in summer.

Buyers and tenants notice daylit interiors immediately. It’s one of the few low-cost upgrades that shows up in property valuation.

Skylight Failures Are Easier to Spot from the Air

When was the last time anyone looked at your skylights up close? A drone inspection from Videl captures every skylight on the roof in under an hour, with high-resolution photos of each one and a written summary of anything that needs attention.

skylight drone roof inspection

/ga

Latest Commercial Roofing Projects

Property Managers Often Ask Us

How much does it cost to install a skylight on a flat roof?

New skylight installation runs $800 to $2,500 per unit, depending on size, glazing type, and how much curb and flashing work the existing roof needs. Repairs on an existing skylight run $200 to $700. Every job is quoted as a fixed price after a free on-site assessment.

What are the best skylights for flat roofs?

Curb-mounted dome and pyramid skylights are the standard for flat commercial and industrial roofs. They sit above the membrane plane, shed water naturally, and integrate cleanly with BUR, modified bitumen, EPDM, and TPO systems. Flat glass units are also an option when the architectural look matters.

Can you put a skylight in an existing commercial roof?

Yes. Most of the skylight installations Videl does are retrofits on existing flat roofs, not new construction. The work is done from the roof down, with minimal disruption inside the building and no need to open the interior ceiling in most cases.

Do you need a permit to install a skylight on a commercial flat roof?

Yes. In Ontario, skylight installation on commercial and industrial buildings almost always requires a building permit because the work involves cutting and framing the roof assembly. The residential exemption that allows skylight installation without a permit only applies to small houses, not commercial properties. Videl handles permit coordination and works to local code on every install.

Will adding a skylight affect my roof warranty?

A skylight installed correctly by a qualified commercial roofer will not void your membrane warranty, as long as the membrane tie-in is done with compatible materials and follows the manufacturer’s spec. Videl installs to manufacturer standards and documents the work for warranty purposes.

Questions? Contact us on WhatsApp!