Industrial Roofing Services
Ontario Industrial Roofing Contractors
Book a Free Roof Assessment
Quality Roofing Materials
Protect your property with durable, weather-resistant, and long-lasting roofing materials.
25+ Years Experience
We have a 5-star Google rating for commercial & industrial roofing services in Ontario.
Guaranteed Workmanship
All roofing projects are covered with $5 million liability insurance & our satisfaction guarantee.
We’re not just another industrial roofing company. We’re the experts property managers call when uptime, safety, and long-term reliability are non-negotiable.
FLAT ROOFS ARE OUR SPECIALTY
Industrial Roofing Experts for 25+ Years
Industrial properties come with strict regulations, aging infrastructure, and constant pressure to make smart, lasting decisions. That means roofing isn’t just another line item—it’s a major liability if it fails.
At Videl Roofing, we help you plan ahead. From preventative maintenance to full system replacements, we bring over 25 years of hands-on experience with industrial flat roofs. Our clients stick with us because we’re transparent, reliable, and we do the job right.
We provide FREE on-site assessments in Southern Ontario
Common Industrial Buildings We Serve:
Flat roofs on industrial buildings come with unique demands from load-bearing requirements and rooftop equipment to drainage systems and high-risk access zones. Working with an industrial roofing company that understands these complexities is key to protecting your operations, assets, and long-term investment.
INDUSTRIAL Roofing Services
Protect Your Equipment, Tenants, and Bottom Line
A single leak can disrupt production, damage equipment, or halt logistics—costing far more than just repair fees. See how our industrial roofing services help you handle rooftop equipment, machinery vibration, temperature swings, and long-term wear.
Industrial Roof Repairs
Targeted repairs for aging industrial roof systems—BUR, TPO, EPDM, and more. We stop leaks fast and reinforce trouble zones without halting operations.
Installs & Replacements
From insulation to membrane, every layer is built for uptime. Our industrial-grade replacements are optimized for durability, efficiency, and compliance.
Emergency Roof Repairs
A single leak can halt production. Our rapid-response team arrives same-day to secure the site, control water intrusion, and minimize operational downtime.
Roof Maintenance
Routine inspections, detailed reports, and proactive service that help prevent emergency repairs and extend roof life by 5+ years.
Industrial Waterproofing
We reinforce seams, flashings, and ponding zones with industrial-grade coatings built for high-load, high-wear environments.
Roof Penetrations
Every penetration is a potential failure point. We properly flash, seal, and reinforce them to protect your system and prevent future leaks.
Quality Industrial & Commercial Roofing Materials
We work exclusively with Ontario’s most trusted industrial roofing manufacturers—including IKO, Lucas, Dow, and Henry—to ensure every system we install or repair meets the highest standards for durability, performance, and long-term value.
Industrial Roofing 101
What Kind of Roof Do You Have? And How Can We Extend Its Life?
Industrial roofs aren’t like residential roofs. They’re flat, functional, and built to protect everything inside—from equipment and inventory to your tenants and their daily operations.
Most property managers and business owners don’t actually know what system they have—until something goes wrong. That’s why every industrial roofing project starts with a free on-site assessment.
Below are the five roof systems we often work with alongside what you need to know to keep each one in shape.
4-Ply Tar & Gravel (Built-Up Roofing)
Old-school and heavy-duty. Still one of the most reliable systems for large, flat-roof industrial buildings. If your facility is 30+ years old, there’s a good chance this is what’s up there.
EPDM (Rubber Roofing)
A flexible, black rubber membrane used on warehouses and commercial buildings across Ontario. It’s been a go-to flat roofing system for decades due to its simplicity and affordability.
TPO (Thermoplastic Polyolefin)
One of the most common modern roofing membranes, especially for new industrial builds. Known for its energy efficiency and clean, white appearance.
Want to compare your options side-by-side?
Each system has strengths—and tradeoffs. Learn which one is best for your building, your budget, and your long-term maintenance plan.
Read Now ➡ 4-Ply BUR vs EPDM vs TPO
Modified Bitumen (2-Ply)
A rugged, multi-layer asphalt-based system often installed with a torch or cold adhesive. Popular on buildings where equipment, access walkways, and durability matter.
Industrial Metal Roofing
Designed for slightly sloped structures, this roofing system uses interlocking steel or aluminum panels for long-term protection.
How Much Does Industrial Roof Replacements Cost in Ontario?
These pricing ranges reflect industry averages for full roof replacement projects in Ontario. Your actual cost will depend on factors like square footage, tear-off complexity, insulation upgrades, and safety access requirements.
| Roof Type | Estimated Cost (per sq. ft.) |
|---|---|
| 4-Ply Tar & Gravel (BUR) | $10 – $15 |
| EPDM (Rubber Roofing) | $8 – $12 |
| TPO (Thermoplastic Polyolefin) | $9 – $14 |
| Modified Bitumen (2-Ply) | $10 – $16 |
| Industrial Metal Roofing | $12 – $18 |
Not ready to replace your property’s roof?
If your current system still has life left, our Preventative Roof Maintenance Plan may be able to extend it by 5+ years. Our proactive approach aims to help you avoid premature replacements and save thousands in capital expenses.
Try our Roofing ROI Calculator to estimate your savings:
FREE
ROOF ASSESSMENT
We’ll visit your location to inspect your roof and provide a free, no-obligation health report.
VIDEL’S ROOFING RESOURCES
Insights & Expert Roofing Advice
From flat roof repairs to full-scale replacements, we share insights that help you protect your building and budget. Prefer live walkthroughs and real job site footage? Join our team on YouTube at Maximize Roof Life.
Maximize Roof Life with Videl
Industrial Roofing FAQ
Q1. What’s the best flat roof system for an industrial building in Ontario?
It depends on your building’s structure, use case, and future plans. TPO is a great choice for energy efficiency and modern retrofits. EPDM is flexible and easy to repair. And 4-Ply Built-Up Roofing (BUR) is still one of the most durable systems available—especially for buildings that need redundancy and strength under load.
Learn how these systems compare →
Q2. How do I know if my industrial roof needs repair or replacement?
Leaks and damage don’t always mean a full replacement is required. Minor issues like seam separation or flashing failure can often be patched if caught early. But if your roof is past 20–30 years old, or if the damage is widespread, replacement might be the more cost-effective path.
Q3. How much does an industrial roof replacement cost?
Costs typically range from $8 to $18 per square foot depending on the system, insulation, accessibility, and whether a full tear-off is needed. We always provide detailed estimates based on a full site assessment—no guesswork.
Start with a free assessment to receive an honest, no-obligation price estimate →
Q4. What should I do if there’s a leak during a storm or after hours?
Call us right away. Our emergency crew will assess the issue and take immediate steps to contain the damage, even if a full repair isn’t possible until conditions improve. Quick action can prevent damage to equipment, inventory, and structural components.
Learn more about our emergency response →
Q5. Is preventative maintenance really worth it for an industrial roof?
Yes—especially on large buildings with flat systems. Routine inspections and minor repairs can extend the life of your roof by 5–10 years, reduce long-term costs, and help you avoid unexpected shutdowns. It’s also a great way to document your roof’s condition over time.
Explore our maintenance plan options →
Q6. Can you help us plan ahead for roof replacement in next year’s budget?
Absolutely. We regularly work with property managers, plant operators, and CAPEX planners to provide condition reports, priority timelines, and accurate cost forecasting. It’s not just about patching problems—it’s about protecting cash flow.
Q7. What should I look for in an industrial roofing contractor?
You want more than just a quote. Look for WSIB compliance, $5M liability coverage, manufacturer partnerships, and proof of similar work. A contractor should understand the demands of industrial sites—like safe access, staging, and operational continuity.
Here’s what to look out for when choosing a roofing contractor →
25+ YEARS COMMERCIAL & INDUSTRIAL ROOFING