FOOD PROCESSING FACILITY ROOFING
Flat Roofing for Ontario’s Food Processing Plants
Grease exhaust, sanitation standards, and 24/7 production schedules put flat roofs under pressure no other building type sees. If your food processing plant has a roofing issue, contact us immediately.
(905) 397-1198 Claim Your FREE Roof ReportClaim Your Free Roof Report
We’ll inspect your roof and provide the answers you need to budget, plan, and protect your property.
Grease Exhaust Destroys Flat Roofs
Why Flat Roofs on Food Plants Wear Out from Grease Exhaust
Every fryer, oven, and cook line in your facility is venting airborne oils straight up through the roof. Those oils land on the membrane, break down the top layer, and work into every seam and flashing within range of the exhaust stack.
Left alone, a grease-saturated membrane doesn’t just leak, it becomes a fire risk and a contamination source directly above your production floor.
Want to know the condition of your food plant’s roof? Get started with a FREE roof condition report:
50+ Point Roof Inspection
by commercial roofing experts
Photo Documentation
of all wear, damage, and deterioration
Detailed Summary of Defects
with prioritized action items and cost estimates
Food Plant Roofing Issues
3 Issues Food Plant Operators Should Watch For
If you manage a food processing facility in Ontario, these are the three things worth asking your industrial roofer about at your next inspection. At Videl, we look for all three on every food plant roof we’re called out to, and every finding is photographed and graded on a remaining useful life scale.
From there, we build a maintenance plan around the findings. Items that need immediate attention get scheduled first, items that can wait go into a multi-year plan, and nothing gets fixed without your sign-off.
Grease saturation
Airborne oils soak into the top layer of the membrane and travel into the insulation below, turning the roof into absorbent material.
Failed penetration tie-ins
Every exhaust stack, curb, and vent is a potential leak point, and grease accelerates the failure of the flashings around them.
Trapped moisture and mould
Once water enters a compromised membrane it doesn’t dry out. It spreads through the insulation and works into the building below.
WHO We Help
Every Food Processing Plant Has a Unique Roof Problem
Depending on your facility type, the roof above is stressed in different ways.
Meat & Poultry Processing Plants
CFIA inspection leaves no room for contamination risk above a processing line. We install sanitary tie-ins around exhaust fans and drains and maintain the membrane on a schedule that matches your audit cycles.
Refrigerated Warehouses & Cold Storage
A failed vapour barrier on a cold storage roof shows up as ice in the insulation long before it shows up as a leak. We install systems with proper vapour control and inspect for condensation damage on every visit.
Food Packaging & Distribution Centres
Foot traffic and rooftop servicing stress the membrane from both sides. We reinforce the high-traffic zones and seal the penetrations around rooftop equipment before wear turns into a surprise leak.
Commercial Bakeries
Oven heat and airborne flour and grease create a rooftop environment standard membranes aren’t built for. We specify heat and oil-resistant membranes and flash every exhaust penetration to match the thermal load.
Dairy Processing Plants
Wash-down schedules and strict moisture control mean any water in the assembly becomes a mould risk fast. We keep the assembly dry with sealed penetrations, tight flashings, and inspections that catch moisture early.
Beverage & Canning
Breweries, juice manufacturers, and canning plants have dozens of rooftop penetrations to manage, so we get the drainage right around every piece of equipment and seal every tie-in to manufacturer spec.
MAXIMIZE ROOF LIFE WITH A
Preventative Roof Maintenance Plan
Avoid surprise repairs and extend the time between costly replacements with expert maintenance tailored to your roof.
Reduce costly repairs
Prevent leaks & damage
Extend roof life
Our Services
Industrial Roofing Services for Food-Safe Facilities & Processing Plants
Videl puts trained, WSIB-covered flat roofers on every job site.
Flat Roof Repair
We track down food plant leaks at the source and repair them without disrupting production.
Flat Roof Repair Services
Flat Roof Replacement
Past the point of patching? We replace it in 5 to 7 days with a system built for your food plant’s building specs.
Flat Roof Replacement Services
Emergency Leak Repair
Leaking right now? Call (905) 397-1198 or learn more about how we respond to emergency situations.
Emergency Repair Services
Flat Roof Maintenance
Our maintenance plans are built around food plant audit cycles and are proven to add 5+ years to your roof’s life.
Preventative Roof Maintenance
Penetration Repairs
Exhaust stacks, HVAC curbs, and vents are where food plant leaks start. We rebuild any failed penetration type.
Penetration Repair Services
Tapered Insulation
We can build new slope into your roof so water drains away from exhaust stacks instead of ponding
Tapered Insulation Solutions
The Videl Difference
Your Rooftop Is Your Most Expensive Asset to Ignore. We Help You Maximize Roof Life.
90-Minute Response Guarantee
Our St. Catharines and Mississauga offices allow us to serve all Southern Ontario. This means we’ll be on-site within 90 minutes or the service call is free.
Contact Us Today$5 Million Liability Insurance
Every project is backed by full liability coverage. Your property, your tenants, and your investment are protected from day one through project completion.
Why Roofing Insurance Matters28+ Years on Ontario Rooftops
We’ve been repairing, replacing, and maintaining commercial flat roofs across Southern Ontario since 1998. That experience means faster diagnostics, fewer surprises, and roofing systems that last.
Meet Your Roofing ContractorsWhat makes food processing roofing different from standard commercial roofing?
Grease exhaust, CFIA oversight, and 24/7 production schedules. A standard commercial roof can tolerate a slow leak for weeks while a repair gets scheduled. A food plant roof can’t — a leak over a production line is an immediate contamination and compliance issue, and the grease loading on the membrane itself accelerates wear in ways you don’t see on a retail plaza.
Can you help us stay CFIA audit-ready?
Yes. Every inspection is photo-documented and filed, so when the auditor asks about the roof, you have the paper trail. Our preventative maintenance plans are structured around the kind of documentation food safety audits require.
Can you do roof work during production hours?
In most cases, yes. We plan around production schedules and coordinate with your maintenance team so repairs don’t disrupt operations. Videl doesn’t shut down production to do roof work — we work around it.
How often should a food plant roof be inspected?
Twice a year — we advise spring and fall — plus a check after any major storm. High-grease-load operations (commercial kitchens, fryers, cook lines) benefit from quarterly inspections because the membrane degradation moves faster.
What causes the most roof problems in food processing plants?
Four things, in this order: grease exhaust saturation, failed HVAC curbs and penetration tie-ins, condensation in cold storage vapour barriers, and ponding water around rooftop equipment. All four are preventable with scheduled inspections and photo documentation of what’s happening up there.
Will you work with our existing HVAC or mechanical contractors?
Yes. Most food plants already have trusted HVAC and refrigeration vendors. We coordinate directly with them so curb work, unit replacements, and membrane tie-ins happen in the right order without finger-pointing when something goes wrong.
Videl Roofing Services in Southern Ontario
We back every service call with a 90-minute response guarantee during business hours (8:30am – 4:30 pm). If we don’t show up in time, you don’t pay.
